Silicon Molybdenum Brick
Silicon molybdenum bricks are mainly made of high alumina clay, mullite, and silicon carbide as raw materials. They have the characteristics of high strength, wear resistance, and excellent thermal shock stability.
-
High strength
-
Wear resistance
-
Thermal shock resistance
Product Introduction
Silicon molybdenum bricks are mainly made of high alumina clay, mullite, and silicon carbide as raw materials. They have the characteristics of high strength, wear resistance, and excellent thermal shock stability.
Product Specifications
| Index | Al2O3(%) ≥ | SiO2+SiC(%) ≥ |
Bulk Density(g/cm3) ≥ |
Apparent Porosity(%) ≤ | Cold Compressive Strength(MPa) ≥ | 0.2MPa Refractoriness Under Load(T0.6℃)≥ | Thermal Shock Resistance(1100℃Water Cycle) ≥ |
Wear Resistance(cm3 )≤ | Thermal Conductivity [ W/(m · K)](1000℃)≤ |
| HWTASM | 70 | 25 | 2.7 | 17 | 120 | 1680 | 15 | 5 | 2 |
| HWGMH | 66 | 30 | 2.65 | 20 | 100 | 1650 | 15 | 6 | 1.7 |
| HWGM-1680 | 65 | 28 | 2.65 | 20 | 100 | 1650 | 12 | 6.5 | 1.7 |
| HWGM-1650 | 63 | 25 | 2.62 | 17 | 90 | 1650 | 10 | 7 | 1.7 |
| HWGM-1600 | 62 | 25 | 2.6 | 17 | 90 | 1600 | 10 | 7 | 1.7 |
| HWGM-1550 | 60 | 25 | 2.55 | 19 | 90 | 1550 | 10 | 7.5 | 1.7 |
| Composite layer | 55 | - | 2 | 30 | 45 | 1450 | - | - | 1.4 |
| Insulation layer | 5 | SiO2 （70） |
≤ 0.3 | - | - | - | - | - | 0.045 |
- Grade:
- HWTASM
- HWGMH
- HWGM-1680
- HWGM-1650
- HWGM-1550
- HWGM-1450
